Last Updated on Saturday, 28 August 2010 08:03 Written by Dave McErvale Saturday, 28 August 2010 06:44

How to maintain your new showerscreen.

When you have a new showerscreen installed keeping the screen looking new is important, listed below is some helpful hints.

Its a good idea to seal the grout in your new tiles.

Make sure your showerscreen is toughened glass and not laminated glass, ever seen the milky look on your glass and you cannot remove it, its because the milky look or stain is in between the laminate or two sheets of glass, toughened glass is one sheet of glass so if you follw these simple instructions below you will keep you screen new, remember showers are continually wet and are a high maintenance area and require you to clean them every day.

• Dont use soap in the shower.
• Use body wash not soap.
• When finnished showering use a squeegee to wipe the glass down.
• Use the shower head to wash excess residue fron the tiles and screen.
• Shammy the glass at least once a week.
• Look for mould build up in the corners and on the tiles, scrub off any mould discolouring.